Water damage in Jerome properties rarely stays where it originated. It migrates through wall framing, saturates subfloor assemblies, moves along structural members, and collects in ceiling cavities — creating hidden moisture pockets that show no visible surface signs but create ideal conditions for mold growth within 48-72 hours. COS Water Damage Restoration's Jerome inspection team uses FLIR thermal imaging, calibrated pin-type and non-penetrating moisture meters, and systematic structural assessment protocols to map water migration through your property completely — before remediation begins or before you close on a purchase.
Here's what makes our Jerome inspection service more than a visual walk-through.
Thermal imaging is non-destructive and covers large surface areas quickly — making it the most efficient way to map water migration in a Jerome property.
Thermal imaging shows probable moisture — calibrated moisture meters confirm it. Our Jerome inspectors use both pin-type meters (direct reading in framing and structural members) and non-penetrating radio-frequency meters (surface reading through drywall and flooring) to take quantified moisture content readings at all thermal-identified locations. These readings are recorded at labeled sensor points and become the data basis for the written inspection report.
A verbal assessment is an opinion. A written report with instrument readings is documentation.
Both use cases are available in Jerome — contact us with your specific situation and our inspector will scope the right assessment.
Here are the specific inspection scenarios and assembly types our Jerome team handles.
When a water damage event has just occurred in a Jerome property — or happened within the last several days — our inspection maps the full extent of saturation while the moisture is still detectable by thermal imaging and direct meter readings. This inspection is the foundation of the remediation scope and the insurance claim documentation. Without it, remediation crews are guessing at what to dry, and insurance carriers are estimating on incomplete data. Our Jerome active event inspection captures the full saturation picture at the moment of peak detectable moisture — when the readings tell the most accurate story of what happened.
Real estate transactions in Jerome frequently involve properties with prior water events — disclosed and undisclosed. Our pre-purchase inspection uses thermal imaging and moisture meters to identify active moisture in structural assemblies, staining patterns consistent with prior water intrusion, and the condition of previous remediation. For Jerome buyers, this inspection provides either confidence that a disclosed water event was properly handled, or documentation that it was not — giving the buyer negotiating leverage and a clear picture of what additional remediation cost, if any, is warranted.
Post-remediation verification is an independent assessment — not a rubber stamp.
Mold risk assessment in Jerome is distinct from air quality testing. We assess structural conditions and visible evidence — not air samples.
Below-grade spaces in Jerome properties — crawlspaces, basement areas, and below-slab conditions — are among the most common locations for chronic moisture problems to go undetected. Our Jerome below-grade inspection covers crawlspace wood framing moisture content readings at joists and beams, vapor barrier condition and coverage, condensation evidence on structural surfaces, and visual assessment for wood rot, fungal growth, and pest damage associated with chronic moisture. Written findings document the below-grade condition for remediation scoping or real estate disclosure.
Our Jerome inspection reports are formatted to the documentation standards that insurance carriers use to evaluate water damage claims in MI.


Same-day scheduling available for active water events. Pre-purchase inspections booked on your transaction timeline.
Systematic, instrument-driven, fully documented during the on-site session.
After the on-site assessment, your Jerome inspector reviews the key findings with you — which areas are affected, what the readings indicate, what water category applies, and what remediation is indicated. If you have questions about specific readings or want to understand what a particular finding means, this is the conversation for it. The verbal review happens on-site.
Report delivered in the format your use case requires, within 48 hours of inspection.



"We were purchasing a Jerome home where the seller had disclosed a prior basement water event and claimed it was fully remediated. COS Water Damage Restoration's pre-purchase inspection found moisture readings in the wall framing adjacent to the original event area that were significantly above dry standard — indicating incomplete drying. The written report we received gave us specific sensor point readings that we used to negotiate remediation credit from the seller before closing. Without that inspection, we would have closed into a mold problem."
"I had noticed a musty smell in a room of my Jerome home for months before calling COS Water Damage Restoration. Their inspection found active moisture in the subfloor assembly under an area rug — a slow pipe drip that had been going on long enough to saturate the subfloor significantly without any visible surface evidence. The written report documented the moisture readings, the thermal images showing the extent of the affected area, and the recommended scope. I would never have found this without the thermal camera."
"We manage a portfolio of Jerome rental properties and COS Water Damage Restoration's inspection service is what we use every time a water event is reported, prior to any remediation starting. The inspection report maps the damage completely — it's what we give our remediation contractor as the scope of work and what we give our insurer as the damage documentation. Having a consistent, instrument-backed inspection process has eliminated the disputes we used to have about whether remediation was complete or whether the damage scope matched what we claimed."
COS Water Damage Restoration's certified inspection team serves Jerome and surrounding communities throughout MI. Call +1-844-499-0972 to schedule your Jerome inspection.
Visible water damage is easy to find. The moisture behind your walls and under your floors is what causes the mold problem three months later. Call +1-844-499-0972 and our Jerome inspection team brings the instruments to find all of it.
📞 Call +1-844-499-0972 — Schedule Jerome InspectionIICRC Certified · FLIR Thermal Imaging · Written Reports · Jerome, MI